NO.28 GEAR POSITION INDICATOR LIGHT ILLUMINATES IN D RANGE OR P, N, R POSITIONS

B3E050319090W32


28	Gear position indicator light illuminates in D range or P, N, R positions
DESCRIPTION	• Gear position indicator light illuminates in D range or P, N, R positions with the ignition switch at ON.
POSSIBLE CAUSE	• M range switch related wiring harness malfunction Note • Before following the troubleshooting steps, make sure that the Automatic Transaxle On-board Diagnostic and Automatic Transaxle Basic Inspection are conducted.

Diagnostic procedure


STEP	INSPECTION		ACTION
1	Do other indicator lights illuminate with the ignition switch at ON?	Yes	Go to the next step.
1		No	Inspect the meter fuse.
2	Inspect the MNL SW PID value using the WDS or equivalent. Is the MNL SW PID value normal?	Yes	Inspect the instrument cluster.
2		No	Inspect the M range switch. If the M range switch is normal, inspect for continuity between the M range switch and PCM terminal 1AQ.
3	• Verify the test results. - If normal, return to the diagnostic index to service any additional symptoms. - If the malfunction remains, inspect the related Service information and perform repair or diagnosis. • If the vehicle is repaired, troubleshooting is completed. • If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM.