GLOW PLUG LEAD INSPECTION [MZ-CD 1.6 (Y6)]

Visual Inspection

1. Remove the glow plug lead from the glow plug. (See GLOW PLUG REMOVAL/INSTALLATION [MZ-CD 1.6 (Y6)].)

2. Verify that there are no metal shavings on the glow plug lead terminals.

3. Verify that the glow plug lead is not broken or bent.

Continuity Inspection

1. Remove the glow plug lead. (See GLOW PLUG REMOVAL/INSTALLATION [MZ-CD 1.6 (Y6)].)

2. Verify that the continuity between the glow plug installation terminal and the glow plug lead connector terminal is as indicated in the table.

• If there is no continuity, replace the glow plug lead.

Glow plug lead continuity